Jintaijin | Independent equipment catalog reference
OTEC benchtop CF 5 T vs CF 9 T: catalog comparison
Compare two OTEC benchtop disc-finishing catalog entries before requesting a current configuration. The container count stays at 1 while the nominal volume per container changes from 5 L to 9 L. A larger container changes the listed diameter from 190 mm to 257 mm; it does not establish a larger permissible workpiece.
Basis: OTEC catalog revision 08/21, page 6. Current configuration and availability are not verified.
Versioned specification differences
| Catalog field | CF 5 T | CF 9 T | Right minus left |
|---|---|---|---|
| Container count | 1 | 1 | 0 |
| Nominal litres per container | 5 L | 9 L | 4 L |
| Arithmetic sum of nominal litres | 5 L | 9 L | 4 L |
| Listed container diameter | 190 mm | 257 mm | 67 mm |
| Listed machine weight | 30 kg | 65 kg | 35 kg |
| Listed apparent power | 0.4 kVA | 0.9 kVA | 0.5 kVA |
| Listed supply voltage | 230.0 V | 230.0 V | 0.0 V |
| Width x depth x height (mm) | 575 x 400 x 680 | 650 x 530 x 830 | 75 / 130 / 150 (W/D/H) |
The listed width changes by 75 mm, depth by 130 mm and height by 150 mm. These are differences between catalog envelopes, before your own access, service and handling allowances.
Compare catalog entries and your available space
Leave all six fields blank for the catalog comparison. For a space review, enter all six in millimetres, including your total added allowance for each axis. Zero allowance is accepted only when you enter it explicitly. Equipment orientation follows W/D/H in the catalog.
Space arithmetic and installation planning
The listed width changes by 75 mm, depth by 130 mm and height by 150 mm. These are differences between catalog envelopes, before your own access, service and handling allowances.
A non-negative margin on every axis means only that the listed envelope plus your entered allowances fits the numbers you supplied. It does not assess doorways, transport, floor loading, guarding, media handling, wastewater, utilities or service access. Confirm those requirements against the current supplier drawing.
Read capacity and electrical units correctly
The container count stays at 1 while the nominal volume per container changes from 5 L to 9 L. A larger container changes the listed diameter from 190 mm to 257 mm; it does not establish a larger permissible workpiece.
The catalog lists 0.4 kVA / 230 V for CF 5 T and 0.9 kVA / 230 V for CF 9 T. Apparent power is not active power or operating energy consumption. A listed voltage is not a verified site connection plan.
OTEC original CF catalog, revision 08/21, page 6, supplies the table facts. Original diagrams here summarize those facts without reusing OEM photographs. Model names identify the catalog entries; this page does not establish a partnership, current sale or Jintaijin equivalence.
Questions about this model pair
How do CF 5 T and CF 9 T differ?
The container count stays at 1 while the nominal volume per container changes from 5 L to 9 L. A larger container changes the listed diameter from 190 mm to 257 mm; it does not establish a larger permissible workpiece.
Is the nominal litre sum usable part capacity?
No. It is container count multiplied by listed nominal litres per container. Media fill, parts, process conditions and permissible loads require model-specific supplier confirmation.
What does the space review calculate?
It adds your total width, depth and height allowances to each listed envelope, then subtracts the result from your available space. All six fields are required when any is entered. It does not rotate the equipment or approve an installation.
Does this table describe current machines or Jintaijin equivalents?
It describes OTEC benchtop models in the 08/21 catalog, page 6. Current builds, availability and options need OTEC confirmation. These figures are not specifications for a Jintaijin machine.
Related trial and inspection tools
Discuss your workpiece and sample-trial requirements with Jintaijin
+86-592-2381506 
IPv6 network supported 