Jintaijin | Independent versioned catalog reference
Roesler FKS 06.1 A2 vs FKS 15.1 A2: catalog comparison
Compare FKS 06.1 A2 and FKS 15.1 A2 using the Roesler high-energy disc factsheet, physical page 2, revision 04/2023. Read gross operating volume, machine dimensions and original power entries side by side. Select an explicitly listed dimension condition, optionally enter your own three maxima, and download the current comparison for supplier review. Confirm current configuration and complete drawings before selecting equipment.
Read the exact configuration and source fields
| Source field | FKS 06.1 A2 | FKS 15.1 A2 |
|---|---|---|
| Gross operating volume, original entry | 60 L | 120 L |
| Base length | 2230 mm | 2620 mm |
| Length with screening unit, when listed | Not listed | Not listed |
| Machine width | 2020 mm | 2260 mm |
| Machine height (factsheet label) | 2350 mm | 2320 mm |
| Maximum loading-unit height in tilted position | 2290 mm | 2560 mm |
| Processing-bowl diameter | 500 mm | 640 mm |
| Screening-unit discharge height | 900 mm | 880 mm |
| Rotary-spinner drive power, original entry | 2,2 kW | 4,0 (5,5) kW |
| Total installed power, original entry | 8,0 kW | 11,0 kW |
| Vibratory screening unit, when listed | Not listed | Not listed |
| Screening-area L x W dimensions, when listed | Not listed | Not listed |
The A2 table prints gross operating volume as 60 L for FKS 06.1 A2 and 120 L for FKS 15.1 A2. The scalar right-minus-left difference is 60 L. Gross operating volume does not establish permissible workpiece loading, batch mass, media ratio or throughput.
The A2 factsheet separates machine height from the maximum height of the loading unit in its tilted position. The brochure drawing uses C for machine height, while its table labels C as Width; this page follows the factsheet Height label and retains that discrepancy. Total installed power and spinner power are different source fields.
Compare with your own dimension limits
Select a listed dimension condition. Leave all three inputs blank for catalog comparison, or enter all three positive decimal maxima. No limits are prefilled. A passing comparison is not installation or process approval.
Compare separate dimension conditions
Listed base length/width/height is 2230/2020/2350 mm for FKS 06.1 A2 and 2620/2260/2320 mm for FKS 15.1 A2. The right-minus-left changes are 390 mm in length, 240 mm in width and -30 mm in machine height.
Length with screening unit is not listed for both records. The corresponding condition is unavailable; the tool does not substitute zero or base length.
The loading unit reaches 2290 versus 2560 mm in the listed tilted position. In tilt mode the height screen checks the larger of machine height and loading-unit tilt height for each model. This is arithmetic on two catalog values, not a supplier-approved installation envelope.
These values do not include inferred maintenance, utilities, guarding, lifting paths or floor-loading allowances. Obtain the complete drawing for the offered configuration and review it with the supplier. Processing-bowl diameter is not a permissible maximum workpiece size; evaluate geometry, sensitivity, media circulation, separation and sample-trial results.
Keep volume and power on their source basis
Rotary-spinner drive power is printed as 2,2 versus 4,0 (5,5) kW. At least one entry includes a parenthetical power option; the original expressions are retained and no scalar difference is calculated. Total installed power is 8,0 versus 11,0 kW. Parenthetical entries retain their original form. Spinner power and total installed power cannot be interchanged; neither is measured operating consumption.
Two-factor volume and parenthetical power entries remain visible as printed. No unspecified motor option is selected. Catalog power is not a measured electricity-use figure and does not predict polishing time, finish quality or parts per hour.
Source: Roesler High Energy Disc Systems factsheet, physical page 2, revision04/2023. The EN.231.02 revision04/2023 brochure supplies additional drawing context from the same publisher; it is not independent testing.
Confirm current availability, exact configuration, controls, utilities and trial conditions with the manufacturer. No Jintaijin equivalence or manufacturer partnership is established.
Questions about this pair
What changes between FKS 06.1 A2 and FKS 15.1 A2?
The A2 table prints gross operating volume as 60 L for FKS 06.1 A2 and 120 L for FKS 15.1 A2. The scalar right-minus-left difference is 60 L. Gross operating volume does not establish permissible workpiece loading, batch mass, media ratio or throughput. Listed base length/width/height is 2230/2020/2350 mm for FKS 06.1 A2 and 2620/2260/2320 mm for FKS 15.1 A2. The right-minus-left changes are 390 mm in length, 240 mm in width and -30 mm in machine height.
Which dimension conditions can I select for this pair?
Length with screening unit is not listed for both records. The corresponding condition is unavailable; the tool does not substitute zero or base length. The loading unit reaches 2290 versus 2560 mm in the listed tilted position. In tilt mode the height screen checks the larger of machine height and loading-unit tilt height for each model. This is arithmetic on two catalog values, not a supplier-approved installation envelope.
Can the power entries estimate operating cost or process speed?
Rotary-spinner drive power is printed as 2,2 versus 4,0 (5,5) kW. At least one entry includes a parenthetical power option; the original expressions are retained and no scalar difference is calculated. Total installed power is 8,0 versus 11,0 kW. Parenthetical entries retain their original form. Spinner power and total installed power cannot be interchanged; neither is measured operating consumption. The source table does not list a process-speed recommendation or electrical frequency. It does not establish a cycle time, media recipe or energy saving for your workpiece.
What does a passing three-limit screen mean?
It means the selected listed length, width and height condition meets your three entered maxima. In tilt mode the height check includes both machine and loading-unit tilted heights. Leave all three limits blank for catalog comparison, or enter all three positive decimal limits. This screen does not approve guarding, service access, floor loading, utilities, loading paths, part fit or process suitability. Ask the supplier for complete drawings and a workpiece trial.
Related trial and inspection tools
Discuss your workpiece and sample-trial requirements with Jintaijin
+86-592-2381506 
IPv6 network supported 