Jintaijin | Independent versioned catalog reference
Roesler FKS 35.2 A3-Tandem vs FKS 55.2 A3-Tandem: catalog comparison
Compare FKS 35.2 A3-Tandem and FKS 55.2 A3-Tandem using the Roesler high-energy disc factsheet, physical page 2, revision 04/2023. Read gross operating volume, machine dimensions and original power entries side by side. Select an explicitly listed dimension condition, optionally enter your own three maxima, and download the current comparison for supplier review. Confirm current configuration and complete drawings before selecting equipment.
Read the exact configuration and source fields
| Source field | FKS 35.2 A3-Tandem | FKS 55.2 A3-Tandem |
|---|---|---|
| Gross operating volume, original entry | 2 x 260 L | 2 x 350 L |
| Base length | 3290 mm | 4030 mm |
| Length with screening unit, when listed | Not listed | Not listed |
| Machine width | 4270 mm | 5030 mm |
| Machine height (factsheet label) | 2500 mm | 2480 mm |
| Maximum loading-unit height in tilted position | 3140 mm | 3550 mm |
| Processing-bowl diameter | 800 mm | 920 mm |
| Screening-unit discharge height | 950 mm | 1060 mm |
| Rotary-spinner drive power, original entry | 11,0 (15,0) kW | 18,5 kW |
| Total installed power, original entry | 33,0 (40) kW | 51 kW |
| Vibratory screening unit, when listed | Not listed | Not listed |
| Screening-area L x W dimensions, when listed | Not listed | Not listed |
The A3-Tandem table prints gross operating volume as 2 x 260 L for FKS 35.2 A3-Tandem and 2 x 350 L for FKS 55.2 A3-Tandem. Both entries have two-bowl multiplication notation; no aggregate volume or scalar volume difference is calculated. Gross operating volume does not establish permissible workpiece loading, batch mass, media ratio or throughput.
A3-Tandem gross operating volume is printed in two-factor form. The tool keeps that expression instead of adding the bowls into one loading allowance. Loading-unit tilt height, machine height, total installed power and spinner power remain separate conditions; parenthetical powers do not identify a selected option.
Compare with your own dimension limits
Select a listed dimension condition. Leave all three inputs blank for catalog comparison, or enter all three positive decimal maxima. No limits are prefilled. A passing comparison is not installation or process approval.
Compare separate dimension conditions
Listed base length/width/height is 3290/4270/2500 mm for FKS 35.2 A3-Tandem and 4030/5030/2480 mm for FKS 55.2 A3-Tandem. The right-minus-left changes are 740 mm in length, 760 mm in width and -20 mm in machine height.
Length with screening unit is not listed for both records. The corresponding condition is unavailable; the tool does not substitute zero or base length.
The loading unit reaches 3140 versus 3550 mm in the listed tilted position. In tilt mode the height screen checks the larger of machine height and loading-unit tilt height for each model. This is arithmetic on two catalog values, not a supplier-approved installation envelope.
These values do not include inferred maintenance, utilities, guarding, lifting paths or floor-loading allowances. Obtain the complete drawing for the offered configuration and review it with the supplier. Processing-bowl diameter is not a permissible maximum workpiece size; evaluate geometry, sensitivity, media circulation, separation and sample-trial results.
Keep volume and power on their source basis
Rotary-spinner drive power is printed as 11,0 (15,0) versus 18,5 kW. At least one entry includes a parenthetical power option; the original expressions are retained and no scalar difference is calculated. Total installed power is 33,0 (40) versus 51 kW. Parenthetical entries retain their original form. Spinner power and total installed power cannot be interchanged; neither is measured operating consumption.
Two-factor volume and parenthetical power entries remain visible as printed. No unspecified motor option is selected. Catalog power is not a measured electricity-use figure and does not predict polishing time, finish quality or parts per hour.
Source: Roesler High Energy Disc Systems factsheet, physical page 2, revision04/2023. The EN.231.02 revision04/2023 brochure supplies additional drawing context from the same publisher; it is not independent testing.
Confirm current availability, exact configuration, controls, utilities and trial conditions with the manufacturer. No Jintaijin equivalence or manufacturer partnership is established.
Questions about this pair
What changes between FKS 35.2 A3-Tandem and FKS 55.2 A3-Tandem?
The A3-Tandem table prints gross operating volume as 2 x 260 L for FKS 35.2 A3-Tandem and 2 x 350 L for FKS 55.2 A3-Tandem. Both entries have two-bowl multiplication notation; no aggregate volume or scalar volume difference is calculated. Gross operating volume does not establish permissible workpiece loading, batch mass, media ratio or throughput. Listed base length/width/height is 3290/4270/2500 mm for FKS 35.2 A3-Tandem and 4030/5030/2480 mm for FKS 55.2 A3-Tandem. The right-minus-left changes are 740 mm in length, 760 mm in width and -20 mm in machine height.
Which dimension conditions can I select for this pair?
Length with screening unit is not listed for both records. The corresponding condition is unavailable; the tool does not substitute zero or base length. The loading unit reaches 3140 versus 3550 mm in the listed tilted position. In tilt mode the height screen checks the larger of machine height and loading-unit tilt height for each model. This is arithmetic on two catalog values, not a supplier-approved installation envelope.
Can the power entries estimate operating cost or process speed?
Rotary-spinner drive power is printed as 11,0 (15,0) versus 18,5 kW. At least one entry includes a parenthetical power option; the original expressions are retained and no scalar difference is calculated. Total installed power is 33,0 (40) versus 51 kW. Parenthetical entries retain their original form. Spinner power and total installed power cannot be interchanged; neither is measured operating consumption. The source table does not list a process-speed recommendation or electrical frequency. It does not establish a cycle time, media recipe or energy saving for your workpiece.
What does a passing three-limit screen mean?
It means the selected listed length, width and height condition meets your three entered maxima. In tilt mode the height check includes both machine and loading-unit tilted heights. Leave all three limits blank for catalog comparison, or enter all three positive decimal limits. This screen does not approve guarding, service access, floor loading, utilities, loading paths, part fit or process suitability. Ask the supplier for complete drawings and a workpiece trial.
Related trial and inspection tools
Discuss your workpiece and sample-trial requirements with Jintaijin
+86-592-2381506 
IPv6 network supported 