Jintaijin | Independent catalog reference
Roesler R 125 WTA vs R 220 WTA: catalog comparison
Compare R 125 WTA and R 220 WTA using Roesler's EN.145.22 catalog, revision 04/2023, physical page 19. Inspect total bowl volume, listed geometry and the original connected-load entry. Enter your own three geometry limits or leave them blank, then download the current result. Confirm current drawings, loading and offered configuration with the supplier before selecting equipment.
Listed specification table
| Source field | R 125 WTA | R 220 WTA |
|---|---|---|
| Total bowl volume | 70 L | 150 L |
| Maximum outer diameter | 910 mm | 1210 mm |
| Processing channel width | 211 mm | 257 mm |
| Processing channel length | 1895 mm | 2612 mm |
| Processing bowl height | 1137 mm | 1080 mm |
| Workpiece discharge height | 504 mm | 493 mm |
| Heating power | 25 kW | 25 kW |
| Connected load (raw catalog entry, kW) | 28.0 | 31.0 |
The catalog lists 70 L for R 125 WTA and 150 L for R 220 WTA: a right-minus-left difference of 80 L. These are total bowl volumes, not allowable part loads or throughput.
Processing channel width changes from 211 to 257 mm; maximum outer diameter from 910 to 1210 mm. Channel length is 1895 versus 2612 mm. The WTA model numbers are not volumes: the actual total bowl volumes for this pair are 70 and 150 L.
Compare with your own catalog limits
Leave all three inputs blank for catalog comparison. Enter all three to screen the listed values against your own limits. No limits are prefilled. Total volume and processing channel width remain catalog fields, not part-load or fit approval.
Geometry and loading review
Processing channel width changes from 211 to 257 mm; maximum outer diameter from 910 to 1210 mm. Channel length is 1895 versus 2612 mm. The WTA model numbers are not volumes: the actual total bowl volumes for this pair are 70 and 150 L.
Ask for a current drawing showing guarding, utilities, service access and floor-loading requirements. Review part geometry, material, sensitivity, fixturing and media flow in a referenced sample trial. The listed bowl volume cannot determine packing fraction, batch weight, cycle time, media ratio or output per hour.
Electrical fields and source basis
Connected load is listed as 28.0 versus 31.0 kW. The arithmetic difference between the listed scalar values is 3 kW. Connected load is not measured consumption and does not estimate running cost. Heating power is 25 kW for each model. Heating power and connected load are separately labelled fields; do not add them or derive operating energy from their difference.
Source: Roesler rotary vibrators catalog EN.145.22, revision 04/2023, physical page 19. All displayed entries were also checked against page 2 of the official rotary-vibrator factsheet, revision 04/2023. This is same-publisher corroboration. It does not prove measured values or the current build.
Confirm the actual configuration, electrical supply, permissible loading and availability with the manufacturer. No current Jintaijin equivalent or manufacturer partnership is established.
Questions about this pair
What changes between R 125 WTA and R 220 WTA?
The catalog lists 70 L for R 125 WTA and 150 L for R 220 WTA: a right-minus-left difference of 80 L. These are total bowl volumes, not allowable part loads or throughput. Processing channel width changes from 211 to 257 mm; maximum outer diameter from 910 to 1210 mm. Channel length is 1895 versus 2612 mm. The WTA model numbers are not volumes: the actual total bowl volumes for this pair are 70 and 150 L.
How should the connected-load entries be read?
Connected load is listed as 28.0 versus 31.0 kW. The arithmetic difference between the listed scalar values is 3 kW. Connected load is not measured consumption and does not estimate running cost. Heating power is 25 kW for each model. Heating power and connected load are separately labelled fields; do not add them or derive operating energy from their difference.
What do the three optional limits check?
The tool compares total bowl volume against your entered minimum, processing channel width against your entered minimum and maximum outer diameter against your entered maximum. Enter all three positive decimal values or leave all three blank. Passing these listed-value checks does not approve a part, process, permissible load or installation.
Do these catalog values establish current equipment or equivalence?
These source values are from revision 04/2023. Confirm the actual offered configuration and availability with Roesler. The same-publisher factsheet corroborates table entries but is not an independent measurement. No Jintaijin equivalence or manufacturer partnership is established.
Related trial and inspection tools
Discuss your workpiece and sample-trial requirements with Jintaijin
+86-592-2381506 
IPv6 network supported 