The source lists vibratory finishing, centrifugal disc finishing, barrel or dry tumbling, and fixture-based or manual polishing as process directions. Select two or more to keep their contexts and validation questions together. A batch route calls for circulation and separation checks; a disc route adds rapid edge change, impingement and nesting concerns. Dry routes add dust, heat and residue questions. Selective manual work requires review of operator variation and local overheating. These qualitative contexts do not select a supplied machine or prove a shorter production cycle.
Select the entries relevant to your review.
Source contexts and checks, not equipment approval. Keep every selected requirement with the part and the actual trial record. Selecting a row does not show that its acceptance condition has been met.
Record the same incoming defects, protected features and inspection criteria for each route. Include loading, unloading, washing, drying, separation and inspection when comparing the complete workflow. Keep the actual configuration and observations with the trial record. The table supplies no comparable energy use, hourly output, cycle duration or cost per part. A machine-direction match is an application review prompt.
Where It Fits: General batch deburring, smoothing, cleaning, and controlled edge treatment
What to Validate: Circulation, part contact, media access, lodging, separation, and total cycle time
Where It Fits: Small robust parts that need faster cutting or shorter cycle times
What to Validate: Rapid edge change, impingement, nesting, temperature, foam, and a narrower safe process window
Where It Fits: Gentle dry smoothing and cosmetic finishing when liquid processing is undesirable
What to Validate: Longer cycles, dust control, media condition, heat, residue, and part separation
Where It Fits: Directional cosmetic work or parts with surfaces that must be treated selectively
What to Validate: Operator variation, local overheating, geometry change, and repeatability
Read the Jintaijin technical article. Source table reviewed 3 October 2026. Possible causes, directions and adjustments remain conditional reference fields.
Email : info@surface-polish.com
IPv6 network supported 
+86-592-2381506 