Jintaijin | Independent specification reference
Walther Trowal CB 600 vs CB 800: specification comparison
Compare CB 600 and CB 800 in the CB circular vibratory finishing machines official table. Gross volume is 600 versus 800 L; maximum drive power at 1,500 rpm is 7 versus 8 kW. Use the tool to inspect differences, enter your own gross-volume and listed-power limits, and download the current comparison. Conditional volume figures need a workpiece-specific review.
Listed specification differences
| Source field | CB 600 | CB 800 | Right minus left |
|---|---|---|---|
| Gross bowl volume | 600 L | 800 L | 200 L |
| Conditional useful volume | 350 L | 470 L | 120 L |
| Listed maximum workpiece dimension | 270 mm | 315 mm | 45 mm |
| Screen area | 4000 cm² | 4900 cm² | 900 cm² |
| Empty weight | 1435 kg | 2110 kg | 675 kg |
| Maximum drive power at 1,500 rpm | 7 kW | 8 kW | 1 kW |
| Maximum centrifugal force | 82000 N | 100000 N | 18000 N |
Gross volume increases by 200 L, from 600 to 800 L. The table lists 350 L conditional useful volume for CB 600 and 470 L conditional useful volume for CB 800. These are conditioned by workpiece geometry, material, sensitivity and the media-to-parts ratio; they do not guarantee a batch of parts.
Maximum drive power at 1,500 rpm changes from 7 to 8 kW, a difference of 1 kW. Screen area changes from 4000 to 4900 cm²; empty weight from 1435 to 2110 kg. The listed maximum workpiece dimension is 270 versus 315 mm, which alone does not approve a particular part.
Compare with your own catalog limits
Leave both inputs blank to compare the listed values. Enter both limits to include an arithmetic screen. No limit is prefilled. The power field used here is maximum drive power at 1,500 rpm.
Read the volume condition before planning a batch
Gross volume increases by 200 L, from 600 to 800 L. The table lists 350 L conditional useful volume for CB 600 and 470 L conditional useful volume for CB 800. These are conditioned by workpiece geometry, material, sensitivity and the media-to-parts ratio; they do not guarantee a batch of parts.
Parts and media occupy the working mixture together. Do not convert the conditional figure or its endpoints into parts per hour, guaranteed batch weight, packing fraction or a media recipe. Record part geometry, material and sensitivity, then confirm the permissible loading and separation conditions with the supplier and a workpiece-specific trial.
Drive values and source basis
Maximum drive power at 1,500 rpm changes from 7 to 8 kW, a difference of 1 kW. Screen area changes from 4000 to 4900 cm²; empty weight from 1435 to 2110 kg. The listed maximum workpiece dimension is 270 versus 315 mm, which alone does not approve a particular part.
The official Walther Trowal CB circular vibratory finishing machines table was captured on 2026-10-04. No manufacturer revision is stated on the HTML table. Listed power is not measured energy use or an estimate of operating cost. Lettered drawing dimensions are not converted to a floor-space rectangle. Obtain current drawings for guarding, service access, utilities and floor loading.
These are independent source references. No manufacturer partnership, current configuration, availability or Jintaijin equivalence is established.
Questions about this pair
What changes between CB 600 and CB 800?
Gross volume increases by 200 L, from 600 to 800 L. The table lists 350 L conditional useful volume for CB 600 and 470 L conditional useful volume for CB 800. These are conditioned by workpiece geometry, material, sensitivity and the media-to-parts ratio; they do not guarantee a batch of parts. Maximum drive power at 1,500 rpm changes from 7 to 8 kW, a difference of 1 kW. Screen area changes from 4000 to 4900 cm²; empty weight from 1435 to 2110 kg. The listed maximum workpiece dimension is 270 versus 315 mm, which alone does not approve a particular part.
Does the useful or net volume guarantee a batch of parts?
No. The source conditions the figure on workpiece geometry, material and sensitivity, which determine the media-to-parts ratio. Supplier review and a referenced trial are needed for permissible part load, handling and process conditions.
What do the two optional limits check?
The tool compares gross volume against your entered minimum and the listed power field against your entered maximum. Enter both positive decimal values or leave both blank. A passing arithmetic check is not part-fit, process, electrical, installation or throughput approval.
Are these current specifications or Jintaijin equivalents?
The source is an official HTML table captured on 2026-10-04, with no manufacturer revision stated. Confirm the actual offered configuration and availability with Walther Trowal. These facts do not describe a Jintaijin model or establish equivalence.
Related trial and inspection tools
Discuss your workpiece and sample-trial requirements with Jintaijin
+86-592-2381506 
IPv6 network supported 