Walther Trowal G 100 vs G 200 vibratory dryer catalog comparison
Review G 100 and G 200 from the official G brochure marked 06/14, physical PDF page2. Compare 6 source fields, keep volume and equipment-rating bases distinct, and record your part, loading, site and acceptance questions. The downloadable review uses the current form inputs. Current website captures and source differences remain visible for supplier confirmation.
Compare the catalog and record your review
Versioned catalog rows
| Source field | G 100 | G 200 |
|---|---|---|
| Drive power (kW; separate from heating) | 0.6 | 1.0 |
| Speed of vibratory drive (RPM) | 1,500 | 1,500 |
| Heating capacity (kW; not measured energy use) | 3.0 | 6.0 |
| Total weight, empty (kg) | 365 | 510 |
| Usable volume (L; drying medium and parts) | 70 | 140 |
| Max. work piece dimension (mm; measured diagonally) | 160 | 180 |
Separate volume from an approved part load
The 06/14 brochure lists G 100 with 70 L usable volume and G 200 with 140 L. The basis includes parts and medium. A qualified normally/generally3:1 medium-to-parts ratio appears in the footnote; it is not a validated loading recipe for your part, and the tool does not divide these figures into a part-only load or production rate.
Review the equipment ratings
Drive power entries are 0.6 kW for G 100 and 1.0 kW for G 200. Speed entries are 1,500 RPM and 1,500 RPM. Heating capacity is separately listed at 3.0 kW and 6.0 kW. These are source equipment ratings, not process settings or measured consumption. No power total, electricity cost, drying time or finishing result is derived.
Record geometry and handling questions
The printed maximum workpiece dimensions are 160 mm for G 100 and 180 mm for G 200. The G brochure explicitly measures diagonally; separation, passage and medium release still need a real workpiece review. Empty weights are 365 kg and 510 kg, which are not installed foundation loads. Adjustable height and lettered drawing fields are excluded from this tool.
Keep current-web differences visible
No numeric difference was found in the selected current-web rows for this pair. This limited check does not establish agreement of all specifications or installed options. Usable volume includes drying medium and parts; generally3:1 is a qualified brochure ratio, not a part-only limit or tested loading rule. Drive power and heating capacity are separate equipment ratings; no summation, electricity consumption or guaranteed drying rate calculated. Maximum workpiece dimension is measured diagonally; not a clearance or separation approval. Lettered adjustable-height/drawing dimensions and optional equipment are excluded from adopted parameter records. No spotless-surface, dryness, polishing or throughput result inferred.
Official current G product pageSource and sample-review scope
Official G brochure, 06/14, physical page2, captured2026-10-05.
This is an independent versioned Walther Trowal reference. It does not establish Jintaijin supply, partnership, equivalent machinery, current offers or trial outcomes. Use the comparison to prepare questions and preserve the source basis. Any text you enter is USER_RECORDED_NOT_VERIFIED.
Questions about this model pair
How do G 100 and G 200 compare in volume?
The 06/14 brochure lists G 100 with 70 L usable volume and G 200 with 140 L. The basis includes parts and medium. A qualified normally/generally3:1 medium-to-parts ratio appears in the footnote; it is not a validated loading recipe for your part, and the tool does not divide these figures into a part-only load or production rate.
What geometry or handling constraints need review?
The printed maximum workpiece dimensions are 160 mm for G 100 and 180 mm for G 200. The G brochure explicitly measures diagonally; separation, passage and medium release still need a real workpiece review. Empty weights are 365 kg and 510 kg, which are not installed foundation loads. Adjustable height and lettered drawing fields are excluded from this tool.
Can the power and speed entries predict operating cost or results?
Drive power entries are 0.6 kW for G 100 and 1.0 kW for G 200. Speed entries are 1,500 RPM and 1,500 RPM. Heating capacity is separately listed at 3.0 kW and 6.0 kW. These are source equipment ratings, not process settings or measured consumption. No power total, electricity cost, drying time or finishing result is derived.
Does the current website use the same source basis?
No numeric difference was found in the selected current-web rows for this pair. This limited check does not establish agreement of all specifications or installed options. Usable volume includes drying medium and parts; generally3:1 is a qualified brochure ratio, not a part-only limit or tested loading rule. Drive power and heating capacity are separate equipment ratings; no summation, electricity consumption or guaranteed drying rate calculated. Maximum workpiece dimension is measured diagonally; not a clearance or separation approval. Lettered adjustable-height/drawing dimensions and optional equipment are excluded from adopted parameter records. No spotless-surface, dryness, polishing or throughput result inferred.
How should I use this comparison in a sample enquiry?
This is an independent versioned Walther Trowal reference. It does not establish Jintaijin supply, partnership, equivalent machinery, current offers or trial outcomes. Use the comparison to prepare questions and preserve the source basis. Any text you enter is USER_RECORDED_NOT_VERIFIED.
Related review tools
Prepare a sample review enquiry
Provide your part drawing, finishing objective, medium and separation restrictions, installation constraints and acceptance method for a SurfacePolish discussion.
Open the SurfacePolish enquiry form
+86-592-2381506 
IPv6 network supported 