Jintaijin | Referenced compound rates
Batch mass finishing compound kilograms per hour calculator
Calculate average product addition (kg/h) from referenced product addition (kg/batch) and observed batch rate (batch/h). Keep packaging labels separate from recipe approval.
Translate a reviewed per-batch addition record into an average product mass addition rate. Keep the observed count window with the export.
Calculate the referenced rate basis
Enter positive decimal values with at most three decimal places. General software ceiling: 1000000 per numeric field. This is an input limit, not a supplier operating range. Reference field: at most 240 visible characters. No dosing or consumption value is prefilled.
Confirm the denominator and time basis
Use actual as-supplied product added per completed batch and an observed batch rate on the same operating basis. Fractional average batch rates are allowed. The calculation does not predict machine capacity, cycle time, losses, rejected batches or chemical performance.
Keep flow-through, recycled liquid and batch addition records separate. Record the product identity and the observation window. This arithmetic does not substitute an inlet-water basis for a final-stream basis or correct product quantities for active strength.
Product addition rate (kg/h) = product addition (kg/batch) x observed batch rate (batch/h). Read the primary publisher unit reference for general definitions. It is not a Jintaijin product instruction.
Published packaging context
| Current manufacturer page title | Nominal mass label | Container label |
|---|---|---|
| Abrasive solution 50kg/drum | 50 kg | drum |
| Polishing degreasing anti-rust powder 50kg/barrel | 50 kg | barrel |
| Stainless steel polishing Cleaning fluid 50kg/drum | 50 kg | drum |
| Polishing Fluid For Metal 20kg/barrel | 20 kg | barrel |
Titles and canonical URLs checked 4 October 2026. These separate product labels are not substitutes for one another. They do not establish usable stock, product dosage, flow, consumption rate or a current SDS.
Keep the calculation with its evidence
JSON exports the current operands, reference, formula, unit basis and source records. Complete product/lot identity and the flow or batch observation window separately. A nonempty reference is an audit field, not proof that an instruction was verified.
The calculation is rate bookkeeping for a reviewed instruction or observation. It supplies no pump stroke setting, dosing calibration, process recommendation, recycle loss or operational guarantee. Use the actual product documentation for those decisions.
Rate review questions
What quantity basis does this batch rate tool use?
Use actual as-supplied product added per completed batch and an observed batch rate on the same operating basis. Fractional average batch rates are allowed. The calculation does not predict machine capacity, cycle time, losses, rejected batches or chemical performance.
What formula is used?
Product addition rate (kg/h) = product addition (kg/batch) x observed batch rate (batch/h). The values and time basis must come from your actual instruction and observation record. Displayed six-decimal arithmetic does not establish measurement accuracy.
Does the calculation choose a dose or consumption rate?
No. Inputs start blank. Package titles provide nominal purchase context only. The tool requires your reference and supplied values and does not verify or recommend them.
Does the JSON output approve a dosing system?
No. It records the current inputs, unit basis, quantities and sources. Pump settings, recycle dynamics, chemical compatibility and performance remain outside the calculation.
Related quantity and rate tools
- Polishing compound whole package order and surplus planner
- Polishing compound grams per litre final volume calculator
- Polishing compound volume percent final volume calculator
- Mass finishing trial setting reason journal
Request a compound rate-basis review with the actual instruction, product identity and your reviewed export.
+86-592-2381506 
IPv6 network supported 