Jintaijin | Measured media geometry review
Angle-cut cylinder media profile and aperture interval review
Compare measured angle cut cylinder media profiles with an aperture interval. Export exact difference ranges alongside verified catalogue labels and source evidence.
The three arithmetic rows preserve the transverse, axial and cut-end ranges separately. An apparently generous transverse difference does not establish access for the complete cut cylinder or subsequent release. Oblique contact, passage depth and both entry and exit features remain outside the calculation.
Compare your measured profile intervals
Use positive values up to 10000 mm, with at most three decimals. This ceiling is a software validation limit. Bounds must use the same unit and include any agreed measurement allowance. No uncertainty or sampling confidence is calculated.
Define the actual sample measurement
Record the cylinder transverse diameter, axial span and an explicitly identified cut-end profile on actual specimens. Do not infer diameter or length from the order of the published size expression. A cut-end observation needs its own photo or sketch reference.
Keep media lot, new-or-worn condition, sample IDs, part feature ID and drawing revision with this export. These identification records must be supplied separately. The smallest and largest sampled dimensions are not proven population limits unless your agreed measurement and sampling method establishes them.
Brown Fused Alumina (Angle Cut Cylinder): catalogue context
The five manufacturer tables share these literal size expressions under Specification (mm): 2*4, 3*6, 4*8, 5*10, 6*12, 8*16. The shape label is Angle Cut Cylinder. Checked 4 October 2026. This agreement does not resolve dimension axes, supplied lot tolerances, bond composition or cutting performance.
- Manufacturer media table 1
- Manufacturer media table 2
- Manufacturer media table 3
- Manufacturer media table 4
- Manufacturer media table 5
Function symbols and process recommendations remain unverified. Request a dimensioned supplier drawing and actual samples rather than interpreting a two-number label as a complete shape definition.
Read numeric differences without approving fit
Every profile is compared independently. An all-positive range means the entered aperture bounds exceed that sampled span numerically; an all-negative range reverses that relation; zero-or-mixed includes equality or overlapping numeric ranges. None establishes a passage, an exit path or freedom from lodging.
Kramer includes separation, hole lodging and media wear among media selection questions. This page records dimensions for that review; it transfers no operating recipe. Read the manufacturer selection guide.
Angle Cut Cylinder measurement questions
Which dimensions should I enter for angle cut cylinder media?
Record the cylinder transverse diameter, axial span and an explicitly identified cut-end profile on actual specimens. Do not infer diameter or length from the order of the published size expression. A cut-end observation needs its own photo or sketch reference.
How is each aperture-minus-profile range calculated?
The lower difference is aperture lower minus profile upper; the upper difference is aperture upper minus profile lower. All inputs are measured bounds in mm, with any agreed measurement allowance already included. This is interval arithmetic, not a probability or predicted clearance along a path.
Does an all-positive difference approve angle cut cylinder media entry or release?
No. It compares the entered one-dimensional bounds only. Part geometry, sample orientation, wear, burrs, passage depth, motion, entry and exit need separate inspection and a reviewed trial.
Are the published size labels entered automatically?
No. Catalogue axis meanings are unconfirmed. The labels are preserved literally for a supplier drawing inquiry. Numeric inputs start blank and must come from actual measured samples and the identified feature.
Related review tools
- Wet finishing media shape exact size catalog query
- Small feature media entry exit edge checklist
- Tumbling media lodging inspection rate calculator
- Mass finishing part acceptance record builder
Request a Angle Cut Cylinder sample geometry review with actual sample IDs, feature drawings and your reviewed comparison export.
+86-592-2381506 
IPv6 network supported 