Jintaijin | Additive manufacturing part review
SLS and MJF nylon powder and channel review planner
Build a SLS / MJF nylon incoming-part review brief: record material, local surface conditions, protected features and preparation records. Export unanswered questions.
Specify nylon grade, printing process and lot rather than assuming all PA12 parts behave alike. Identify powder-retaining features and their inspection methods. This brief supplies no powder-handling procedure, minimum channel size or medium selection.
Build your SLS / MJF nylon condition review brief
Enter observations and document references, not personal contact details. Unknown states remain questions. Each text field accepts at most 240 visible characters.
Separate the incoming conditions
Outer texture and an inaccessible cavity pose different review questions. Record channel IDs and openings without inferring that a medium can enter and exit. An external photo cannot establish the condition of every internal surface.
- Grainy sintered skin: record the actual feature and observation.
- Channel entrance / cavity ID: record the actual feature and observation.
- Residual-powder observation: record the actual feature and observation.
Define what must be preserved
Identify the drawing revision, protected feature and inspection owner. Visual and dimensional changes are separate observations. If no local limit or inspection method has been agreed, leave the question open instead of interpreting a cosmetic goal as an acceptance requirement.
Source context and preparation records
Formlabs separates SLS powder removal from subsequent surface treatment. Its SLS examples are context; obtain the actual MJF or SLS supplier instructions for your part. Read the manufacturer reference.
The Jintaijin additive manufacturing article lists these incoming-condition examples, checked 4 October 2026. Only observation categories are used. Its media, sequence and outcome columns are not accepted as a validated recipe.
This tool does not establish supplier capability for your material or replace applicable material instructions. Request a representative technical review with actual part records before agreeing trial conditions.
SLS / MJF nylon review questions
Can a clean outside surface prove all internal powder is removed?
No. Record each channel or cavity and its inspection method. Unknown internal condition stays an unanswered question.
Does this planner recommend a finishing recipe?
No. It records incoming conditions and inspection requirements. No validated time, media, concentration or stock-removal recipe is supplied.
What happens to unknown instruction status?
It stays in the unanswered list. Documented or not applicable requires a reference or reason. The export preserves inputs without converting them into approval.
Does the export send an inquiry automatically?
No. JSON downloads locally. Review before sharing with a technical contact. No contact details or submission are required by this tool.
Related inspection tools
- Mass finishing part acceptance record builder
- Deburring same feature dimensional change calculator
- Small feature media entry exit edge checklist
- Mass finishing interval inspection record builder
Request a SLS / MJF nylon part review after reviewing the downloaded brief.
+86-592-2381506 
IPv6 network supported 