Jintaijin | spin-dryer space review
Centrifugal spin dryer room envelope clearance review
Review 4 published spin-dryer machine envelopes against available L/W/H and your own reserves. Export axis margins; installation remains unverified.
Compare a three-axis room scenario with published machine outside dimensions. This review adds height and explicit user reserves to plan-space arithmetic, so a short length difference cannot conceal a height conflict. Enter the usable rectangle and ceiling height from your own survey, document the reserves separately, and export the current result for drawing review.
Review all three available axes
The initial available dimensions (900 × 1000 × 850 mm) combine this family's maximum published axes for demonstration; they are not a measured room. Zero initial reserves are not recommended clearances. Replace every field with your scenario.
Available axes must be positive; total axis reserves can be zero. Inputs allow two decimals and a 10000000 mm software ceiling. A reserve is the total extra amount on an axis, not an automatically applied per-side allowance.
spin-dryer catalogue dimensions
| Model | Outer L × W × H (mm) | Net weight (kg) |
|---|---|---|
| Model 35 (Heavy-Duty) | 650 × 800 × 800 | 80.0 |
| Model 35A (Economy) | 750 × 700 × 710 | 150.0 |
| Model 70A (Economy) | 900 × 580 × 730 | 170.0 |
| Model 70 (Heavy-Duty) | 800 × 1000 × 850 | 100.0 |
Two matching source tables rechecked 3 October 2026: Primary catalogue table 1 · Primary catalogue table 2. Axis order follows the explicit L × W × H row heading. Net weight is not packed weight or floor loading approval.
The four dryer heights are 800, 710, 730 and 850 mm. Basket diameter and height belong to an internal reference and cannot replace outer room-envelope dimensions. Catalogue Heavy-Duty/Economy labels do not rank spatial suitability.
Height, access and supplied arrangement
Confirm loading and unloading access, supplied cover travel and service requirements on a drawing. No cover-opening height, drying cycle, load or electrical connection is inferred.
Only outside envelope dimensions are sourced here. Manufacturer-required access reserves are not in this dataset, so no reserve has been supplied as a recommendation. Preserve measured room dimensions, who supplied each reserve, and the current drawing version with your review.
Read the margins without treating them as approval
Required axis equals the oriented catalogue axis plus the total user-entered reserve. Margin equals available axis minus required axis. A negative value identifies an arithmetic exceedance; zero is exactly on the entered boundary. The JSON export includes original records, evidence hashes, axis orientation and current inputs. Swapping plan axes leaves height unchanged and does not confirm a permissible layout.
Questions about this space review
What is the source envelope for the spin-dryer family?
The four dryer heights are 800, 710, 730 and 850 mm. Basket diameter and height belong to an internal reference and cannot replace outer room-envelope dimensions. Catalogue Heavy-Duty/Economy labels do not rank spatial suitability.
How do I enter reserves for this spin-dryer review?
Enter the total added dimension on each axis, not a per-side value. Obtain requirements from the current supplier drawing or enter your own explicitly documented scenario. Initial zero reserves are only a demonstration and are not manufacturer minimum clearances.
Can I swap length and width for spin-dryer equipment?
The switch exchanges only the two plan axes to explore arithmetic. It preserves published height. It does not authorize physical rotation, access direction, handling or operation in that orientation.
Do nonnegative margins approve this spin-dryer installation?
Confirm loading and unloading access, supplied cover travel and service requirements on a drawing. No cover-opening height, drying cycle, load or electrical connection is inferred. Nonnegative margins only mean the entered rectangular arithmetic envelope is no larger than the entered available axes. Floor capacity, foundations, doorways and movement routes remain separate checks.
Related tools and drawing inquiry
Browse this family's process reference fields. Compare outer floor footprints. Organize quotation evidence.
Request a spin-dryer supplied-drawing review with your current export, room survey and documented reserve assumptions.
+86-592-2381506 
IPv6 network supported 