Acetate frame starting condition review tool

The source distinguishes light routing marks, deep cuts or heavy chatter, haze on a dimensionally correct surface, and thin or detailed frames. Select the actual incoming conditions. Deep defects retain an upstream-correction question rather than being hidden inside a longer tumbling cycle. Haze brings cleanliness, paste, fine-stage and cleaning checks. Thin or carved geometry keeps detail, thickness, alignment and assembly interfaces in the acceptance discussion. No cycle duration or paste concentration is inferred.

Review incoming condition

Light routing marks and rough edgesDeep cuts, gouges, or heavy chatterHazy but dimensionally correct surfaceThin, carved, or highly detailed frame

Select the entries relevant to your review.

Acetate frame starting condition review tool - First review field for each entry - Jintaijin — First review field for each entry. Original diagram of qualitative source fields; not a trial outcome.

Separate light marks from defects that need upstream correction

Source directions and acceptance checks. Keep every selected requirement with the part and the actual trial record. Selecting a row does not show that its acceptance condition has been met.

Preserve the assembly interfaces in the acceptance plan

Identify the lens groove, hinge seat, bridge, decorative carving and other features that must stay within the drawing. Use a consistent viewing light for clarity and residue inspection. Keep the incoming dimensions and fit checks with the sample. A visually clearer surface is not enough if a groove, bevel or interface has changed. The listed acceptance statements need buyer-approved measurable methods before any production release.

Reviewed source reference

Light routing marks and rough edges

Process Direction: Controlled rough and intermediate stages may gradually level the surface

Acceptance Check: Marks reduced without losing bevels, grooves, or dimensional fit

Deep cuts, gouges, or heavy chatter

Process Direction: Correct upstream before tumbling; do not rely on excessive cycle time

Acceptance Check: Defect root removed without changing the designed profile

Hazy but dimensionally correct surface

Process Direction: Review media cleanliness, paste condition, fine-finishing stage, and final cleaning

Acceptance Check: Uniform clarity under consistent lighting with no residue in recesses

Thin, carved, or highly detailed frame

Process Direction: Use conservative loading and short inspection intervals; consider selective hand finishing

Acceptance Check: Detail, thickness, alignment, and assembly interfaces remain within specification

Read the Jintaijin technical article. Source table reviewed 3 October 2026. Possible causes, directions and adjustments remain conditional reference fields.

Acetate frame starting condition review tool - Risks or checks remain visible - Jintaijin — Risks or checks remain visible. Original diagram of qualitative source fields; not a trial outcome.

what are you looking for?