OBD-360D magnetic finisher workpiece and pin load reference

Check two entered masses against the distinct published OBD-360D reference intervals: workpieces at 8–10 kg and polishing pins at 0.3–2.0 kg. An in-range comparison only describes the table relationship. It does not establish that the combined contents circulate correctly or meet the required finish, cleanliness or protected-feature limits.

Compare the published family fields

Workpiece mass to compare (kg)Polishing-pin mass to compare (kg)

Enter comparison fields from this equipment family.

OBD-360D

Net machine weight (kg): 110.0
Motor rating (kW): 1.5
Published speed expression: 0-1800 RPM (Continuously Adjustable)
Published supply voltage: 220-240 VAC
Published workpiece mass interval (kg): 8–10
Published pin mass interval (kg): 0.3–2
Drum diameter × height (mm): 400 × 250
Outside sequence, axis order unconfirmed (mm): 600 × 500 × 1000

Treat the two masses as separate fields

The primary OBD-360D table distinguishes workpiece capacity from polishing-pin weight. The query compares each entered mass to its own interval and includes stated boundary values. It does not combine the intervals into an allowed total load or choose a pin-to-part ratio. No water or compound quantity is inferred.

An interval match is not a process recommendation

Part shape, feature access, load concentration, contact sensitivity and separation can affect a trial. A mass inside the stated reference interval does not establish free movement or consistent finishing. An out-of-range result means this record does not cover both entered values; it does not prove that an alternative configuration is impossible or safe.

Read the working container reference

The source lists a processing drum diameter of 400 mm and height of 250 mm. Those dimensions are shown as a reference, without turning them into a usable cylinder-volume estimate or part-fit certification. Confirm the current container drawing, actual permitted contents and the loading method with the supplier.

Why are external dimensions not filter inputs?

The table gives 600 × 500 × 1000 mm as overall dimensions but does not explicitly assign the axes in that row. The reference preserves the sequence and asks for a drawing, rather than silently converting it into LWH filtering. The 1.5 kW motor and 0–1800 RPM range likewise do not establish a validated cycle setting for a particular workpiece.

Record pin retention independently of finish

A trial record should identify the actual pin size and shape, feature locations inspected, separation stage and acceptance method. A visible polished surface does not establish that a blind recess is free of pins. Record the intended burr or finish result and the protected-feature and retained-media observations separately, then request a technical review using the same part drawing.

OBD-360D magnetic finisher workpiece and pin load reference - Two published mass intervals, two separate checks - Jintaijin — Two published mass intervals, two separate checks. Reference fields and review method; no trial outcome is claimed.

OBD-360D magnetic finisher workpiece and pin load reference - Preserve the source container and axis limits - Jintaijin — Preserve the source container and axis limits. Reference fields and review method; no trial outcome is claimed.

OBD-360D magnetic finisher workpiece and pin load reference - Interval match to representative part review - Jintaijin — Interval match to representative part review. Reference fields and review method; no trial outcome is claimed.

Related equipment and production reviews

Source and technical review

Source tables checked 3 October 2026: Primary model table 1. Published reference fields require confirmation for the supplied build and the intended part trial.

Open the enquiry form with this family reference. Filtering stays in this page and does not submit an enquiry.